Name: GTechniq EXO v4 Ultra Durable Hydrophobic Coating, 30ml
Brand: GTECHNIQ
SKU: 6455e94cd8d6a900114c729f
Price: 569.0 HKD
Availability: InStock

你的購物車是空的

${{ (item.variation.media ? item.variation.media.alt_translations : item.product.cover_media.alt_translations) | translateModel }}$ ${{ (item.variation.media ? item.variation.media.alt_translations : item.product.cover_media.alt_translations) | translateModel }}$

{{ childProduct.title_translations | translateModel }}

{{ getChildVariationShorthand(childProduct.child_variation) }}

{{ getSelectedItemDetail(selectedChildProduct, item).childProductName }} x {{ selectedChildProduct.quantity || 1 }}

{{ getSelectedItemDetail(selectedChildProduct, item).childVariationName }}

{{item.quantity}}x HK$0 {{ item.unit_point }} 點

刪除

${{addonItem.product.cover_media.alt_translations | translateModel}}$

{{addonItem.quantity}}x {{ mainConfig.merchantData.base_currency.alternate_symbol + "0" }}

刪除

GTechniq EXO v4 Ultra Durable Hydrophobic Coating, 30ml

EXOv4 Ultra Durable Coating
-Improved durability
-Same great gloss, water and dirt repellency
-Significantly easier to apply

全店，買滿$500免本地運費

HK$569.00

HK$488.00 會員獨享

{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{shoplineProductReview.total}} {{'product.product_review.reviews' | translate}}

{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'product.product_review.reviews' | translate}}

一次最大商品購買數量限制為 99999

該數量不適用，請填入有效的數量。

售完

若想購買，請聯絡我們。

加入追蹤清單

商品描述

EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

It has a consistent film that is more durable and resistant to road salt and washes chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish.

All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology.

使用方法

EXOv4 可以作為獨立塗層或作為Gtechniq Crystal Serum Light (CSL)的面層使用,建議將 CSL 作為底層使用
如果使用CSL，則應在完成CSL 後至少 1 小時才使用 EXOv4。
如果您使用C1，則應在完成 C1後至少 4 小時但少於 12 小時內使用 EXOv4。
確保您的車輛沒有陽光直射但溫度高於 5 攝氏度，完全乾燥並且在使用後至少保持乾燥 12 小時
使用Gtechniq Panel Wipe 和The Rag Company Microfiber Towel The Pearl - Edgeless 擦拭所有表面（將 Panel Wipe 直接塗抹在布上，而不是直接塗抹在表面上）
搖勻瓶子並戴上手套
將產品均勻地填滿施工墊子，使墊子浸透
使用以重疊筆觸提供的塗抹器塗抹在大約 2 英尺 x 2 英尺的區域。塗在面板後等待 1 到 2 分鐘，然後用毛巾擦拭，然後用第二條毛巾去除任何污跡，使表面光滑
完成車輛塗裝後，我們建議從與第一層相同的位置開始重複該過程，並以相同的順序塗裝，以便為整個車輛塗上兩層 EXO
在暴露於水分之前讓塗層固化至少 12 小時
完成後，我們建議您至少7天不要洗車
儲存在陰涼，乾燥的地方
開封後3個月內使用

Simple Steps To Help You Get The Best Results

EXOv4 can be applied as a standalone coating or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) – we recommend applying C1 or CSL as a base coat for easy to mark and dark paints
If you are applying over C1, EXOv4 should be applied a minimum of 4 hours, but less than 12 hours, after you finish the C1 application
If you are applying over CSL, EXOv4 should be applied at least 1 hour after application of the CSL.
Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees celsius, is completely dry and will stay dry for at least 12 hours after application
Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe directly to the cloth and not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
Shake the bottle well and wear gloves
Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is saturated
Apply with the applicator provided in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm). Wait for 1 to 2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any smearing, leaving the surface slick
Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of EXO
Allow the coating to cure for at least 12 hours before exposure to moisture
After application, we recommend that you do not wash the car for at least 7 days
Store in a cool, dry place
If opened, use within 3 months, if unopened, use within 12 months