Name: GTechniq EXO v5 and Crystal Serum Light, 50ml
Brand: GTECHNIQ
SKU: 64437fc29fef630017a5b2e8
Price: 1598.0 HKD
Availability: InStock

GTechniq EXO v5 and Crystal Serum Light, 50ml

Crystal Serum Light
-Chemical resistance from a prosumer grade product
-Incredible gloss
-3 to 5 years durability

EXOv5 Ultra Durable Coating
-Improved durability
-Same great gloss, water and dirt repellency
-Significantly easier to apply

全店，買滿$500免本地運費

HK$1,598.00

HK$1,518.00 會員獨享

{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{shoplineProductReview.total}} {{'product.product_review.reviews' | translate}}

{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'product.product_review.reviews' | translate}}

一次最大商品購買數量限制為 99999

該數量不適用，請填入有效的數量。

售完

若想購買，請聯絡我們。

加入追蹤清單

商品描述

功能介紹：

GTechniq EXO v5：

GTechniq EXO v5是一種高效的汽車保護產品，具有多項關鍵功能。首先，它創建一個強大的保護層，可保護您車輛的外觀免受各種外部威脅，如酸雨、污垢、昆蟲殘骸等。此外，它具有高效的水疏效果，使雨水在表面快速排斥，提高駕駛時的視野，並減少水斑。最重要的是，EXO v5的耐久性非常強，能夠長期保護您的車輛，延長保護效果的持久性。

Crystal Serum Light, 30ml：

Crystal Serum Light是一種高硬度的陶瓷保護塗層，具有卓越的耐久性和抗化學性質。這款產品能夠為您的車輛創建一層堅固的保護層，能夠抵禦日常的刮擦和化學品侵害。它的耐久性非常長，能夠在車輛表面保持多年。此外，Crystal Serum Light還提供出色的水疏效果，使水滴在表面快速排斥，並具有高度透明性，不會影響車漆的外觀。這使得它成為長期保護車輛外觀的理想選擇。

Crystal Serum Light is an excellent DIY, stand-alone coating offering unparalleled gloss and gloss retention through its superb resistance to wash swirls. However, its water repellency falls short of what EXO has to offer. Therefore, if you want the best for your car, remarkable swirl resistance and water repellency, then this kit certainly is for you.

You can save 20% when buying this kit, in comparison to buying each product separately.

Simple Steps To Help You Get The Best Results

To apply Crystal Serum Light (CSL) make sure your vehicle is indoors and can stay indoors for 12 hours after application, do not apply in direct sunlight
Only apply the product at a temperature between 5°c and 25°c
Shake well and wear gloves
Wash and decontaminate your paintwork thoroughly prior to application. If required, polish your paintwork, either by machine or hand, to remove any imperfections
Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections
Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation
Replace the lid on the bottle and set it aside – do not keep the bottle in your hand as this promotes premature curing
Apply in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm)
Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth
Inspect the surface for residue with a bright, diffused light source
If you have removed the residue and it cures fully, you should polish the area and reapply CSL
As soon as you finish, put your MF1 cloths in water, wash and dry them as soon as possible
Wait a minimum of 1 hour after applying CSL before applying EXO Ultra Durable Hydrophobic Coating, or C2 Liquid Crystal
Store in a cool, dry place
If opened, use within 3 months, if unopened, use within 12 months

* Avoid direct application to plastic trims, rubbers and hard plastics. *

EXOv4 can be applied as a standalone coating or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) – we recommend applying C1 or CSL as a base coat for easy to mark and dark paints
If you are applying over C1, EXOv5 should be applied a minimum of 4 hours, but less than 12 hours, after you finish the C1 application
If you are applying over CSL, EXOv5 should be applied at least 1 hour after application of the CSL.
Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees celsius, is completely dry and will stay dry for at least 12 hours after application
Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe directly to the cloth and not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
Shake the bottle well and wear gloves
Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is saturated
Apply with the applicator provided in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm). Wait for 1 to 2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any smearing, leaving the surface slick
Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of EXO
Allow the coating to cure for at least 12 hours before exposure to moisture
After application, we recommend that you do not wash the car for at least 7 days
Store in a cool, dry place
If opened, use within 3 months, if unopened, use within 12 months